The "Information" tab shows the following information about the selected session:
The "Station name" field shows the access device's name that was defined via
the vSpace admin console.
The "Logged in user" field shows the username that is currently logged in.
The "Default user" field shows the default username for the vSpace user session.
If one is not configured, it shows the last user that logged in.
The "Status" field shows the session connection status.
The "Client connection" field shows the UTMA session and the IP address of the
access device used.
The "Display Id" field shows the access device’s display ID.
The "Hardware Id" field shows the access device’s virtual hardware ID.
The "Keyboard Id" field shows what type of keyboard interface is used.
The "Pointer Id" field shows what type of pointer interface is used.
In the toolbar, there are three buttons: “Send Message,” “View Station” and “Stop Station.
Note: The “View Station” button may not be present if this function is disabled. The “View
Station” button is not present when you select the session that you are currently using.
To Next Page
Loading...
