USB Virtual Desktop (Model U170) User Manual
Page 11
Mounting and Security
Using two screws (provided) you can attach the U170 to the back of an LCD monitor that has
VESA-compliant mounting holes, as shown below. To secure the U170 device, you can attach a
security cable using the provided slot (between the mounting screw holes).
Note: Performance may be impacted by poor quality cables or hubs. We
recommend using USB 2.0-certified cables with minimum wires sizes of AWG
24 (power) and 28 AWG (signal). (Note: the higher the number, the smaller the
wire.)
To Next Page
Loading...
Need help?
General