NCR 4072 - 7 Specifications

39
NCR 4072 UPS Site Preparation, Installation, and Operation Manual S 05147374 Rev C Uncontrolled Copy
Chapter 7 Specifications
This section provides the following specifications for the NCR 4072 UPS
models:
쑺 Dimensions and weights
쑺 Electrical input and output
쑺 Environmental and safety
쑺 Battery
Table 3. Model List and Mechanical
120V Models 230V Models
UPS Models
4072-0500-7194
4072-0750-7194
4072-1000-7194
4072-1400-7194
4072-0500-7494
4072-0750-7494
4072-1000-7494
4072-1400-7494
UPS Dimensions
(WxHxD)
500 VA: 15.0 x 19.3 x 27.0 cm (5.9² x7.6² x 10.6²)
750–1000 VA: 15.0 x 19.3 x 33.5 cm (5.9² x7.6² x 13.2²)
1400 VA: 15.0 x 19.3 x 39.0 cm (5.9² x7.6² x 15.4²)
UPS Weights
500 VA: 7.8 kg (17.2 lb)
750 VA: 12.4 kg (27.3 lb)
1000 VA: 12.6 kg (27.8 lb)
1400 VA: 16.8 kg (37.0 lb)
Table 4. Electrical Input
120V Models 230V Models
Nominal Voltage
110V, 120V selectable 220V, 230V, 240V selectable
Voltage Range
±20% for nominal voltage at full load
Nominal Frequency
45–65 Hz, 50/60 Hz auto-sensing
Efficiency (Normal
mode)
95%
Noise Filtering
Full-time EMI/RFI filtering
Overcurrent Protection
Resettable input overcurrent protector N/A
Connections
6 -ft, 5 -15P power cord (90° angle) 10A, IEC-320 input connector