Journal Printer
Clearing Jams - Graphics Printer
P77 ATM - Operator Manual 6-15
7 Check that the printed take-up roll is winding on evenly and
that it is not being crumpled against one of the roll guides. If
you cannot move the paper away from the guide, you should
replace the journal roll as explained in the previous section.
8 If you are able to straighten out the paper – close the print
mechanism cover, pushing it until it clicks shut. A “smiley”
graphic should be printed. Press the paper feed button until the
paper has smoothed out and appears to be feeding through
without problems.
9 If the paper is badly crumpled or torn across, you should
replace the journal roll as described in the previous section.
10 Follow your in-house procedures for indicating that a jam has
been cleared in the journal printer.
11 Press the Normal/Supervisor switch, on the operator panel, to
the Normal position.
12 Close and lock the top cabinet.
Book.bk Page 15 Tuesday, July 24, 2001 9:13 AM
To Next Page
Loading...
