Getting Started
Security Enclosures with Controlled Access Electronic Lock
2-18 P77 ATM - Operator Manual
Closing the Mas-
Hamilton Lock
2
To close the Mas-Hamilton lock, proceed as follows:
1 Close the safe door.
2 Spin the opening/closing knob counter clockwise to activate the
bolt and charge the lock until IPI is displayed on the LCD.
3 Hold the PI key against the key reader.
4 A unique 4-digit close code will be displayed. All locks are
closed.
Note: Take a note of the close code as it is required by the KMC
(Step 6).
5 Close the exterior of the 5877 and remove the key.
6 Phone the KMC.
Note: Ensure that the lock/doors on the 5877 are locked/closed
before contacting the KMC.
7 Verify identification
8 Provide the 4-digit close code to the KMC.
9 The KMC will inform you that either the code is correct or give
you the correct procedure to follow if the close code in wrong.
Book.bk Page 18 Tuesday, July 24, 2001 9:13 AM
To Next Page
Loading...
