Error Reporting
How Errors In The PC Module Are Reported
P77 ATM - Operator Manual 3-3
How Errors In The PC Module Are
Reported
3
The SOH reporting system does not report on the operator panel if a
fault has occurred on one of the boards in the PC module.
The boards in the PC module are tested during power-up and at
reset. If a fault is detected on one of the components of the PC
module, the SOH Light Emitting Diode (LED) will be illuminated
red. Following is a summary of the LED colour code.
LED Colour Description
Amber Test Still Executing
Red Test Failed
Green Test Passed
Unlit No Power To Module
Book.bk Page 3 Tuesday, July 24, 2001 9:13 AM
To Next Page
Loading...
