Getting Started
Security Enclosures with Controlled Access Electronic Lock
P77 ATM - Operator Manual 2-17
9 Hold the PI key against the key reader to charge the PI key:
10 If the correct 6-digit code has been entered and a valid PI key
has been pressed against the key reader, OPr will be displayed
on the LCD.
Note: If an incorrect code/PI key is used or there was a bad PI
key contact, a lightning bolt will be displayed on the LCD,
indicating an error condition. If it was a bad PI key contact,
YOU HAVE ONE MORE ATTEMPT AT OPENING THE
LOCK. If the error condition occurs after the 2nd attempt,
contact the KMC immediately.
11 Turn the opening/closing knob a quarter turn (90 degrees)
clockwise to release the bolt.
12 Open the safe door.
2
3
4
5
1
*
EC
6
#
7
8
9
0
Keypad
LCD
Knob
(Opening/Closing)
Key Reader
Key
Book.bk Page 17 Tuesday, July 24, 2001 9:13 AM
To Next Page
Loading...
