Getting Started
Security Enclosures with Controlled Access Electronic Lock
2-16 P77 ATM - Operator Manual
To open the Mas-Hamilton lock, proceed as follows:
1 Phone the KMC
2 Give requested details to verify identity to the KMC.
3 Take note of the 6-digit access code (three pairs of two),
allocated by the KMC.
4 Unlock and open the exterior of the 5877.
5 Spin the opening/closing knob of the lock counter clockwise,
this charges the lock, until EC is displayed on the LCD.
Note: If DL (Dial Left) is displayed, you must only turn the
opening/closing knob to the left (counter clockwise).
6 Turn the opening/closing knob to the home position.
7 Enter the 6-digit access code provided by the KMC.
8 IPI should be displayed on the LCD.
Book.bk Page 16 Tuesday, July 24, 2001 9:13 AM
To Next Page
Loading...
