Currency Dispenser
Clearing Jams - Bunch Dispenser
4-6 P77 ATM - Operator Manual
3 The procedures for clearing a jam depend on the cause and
location of the jam. The SOH message will indicate where the
jam is.
●
If SOH indicates a bill jam at the pick sensor/ module, or a
gulp feed failure, go to Step 4.
●
If the SOH message indicates a bill jam in the main
transport, proceed to Step 7.
●
If the SOH message indicates a bill jam at sensor 2, proceed
to Step 9.
●
If the SOH message indicates a bill jam at sensor 1 or a
purge bin overfill, proceed to Step 11.
●
If the SOH message indicates a bill jam at sensor 4, 5, or 6
proceed to Step 14.
Book.bk Page 6 Tuesday, July 24, 2001 9:13 AM