Receipt Printer
Replenishing Paper
P77 ATM - Operator Manual 5-3
5 Close the print mechanism cover - push it down until it clicks
shut.
6 Remove sufficient paper from the new supply roll so that no
traces of glue or tape remain on the roll. Tear off the end of the
supply roll to make a reasonably straight edge without creases.
7 Insert the spindle into the core of the new paper roll. Lower the
paper roll into the printer so that the spindle drops into the
slots. The paper feeds from the top of the roll.
Note: Graphical instructions are provided on the side of the
printer.
Book.bk Page 3 Tuesday, July 24, 2001 9:13 AM
To Next Page
Loading...
