1-14 Chapter 1: General Overview
The values currently stored in the Registry for NCR 5932 USB
keyboards can be retrieved by clicking the Get Registry Map button. The
only values stored in the registry are the values that are non-default.
All of the keys can be restored to default values with the Restore All
Defaults button.
After assigning new values to keys or restoring default values, the
values may be written to the registry using the Set Registry Map button.
This is the only action that actually causes the registry to be written. All
other actions are held in program memory for display on the GUI.
Only clicking this button will cause the current values to be saved.
The Done/Exit button exits the control. If the Done/Exit key is pressed
without pressing the Set Registry Map button, then no modifications are
saved.
To Next Page
Loading...