Chapter 5: Service 5-11
Removing the Keyboard Membrane Sheet
1. Lay the keyboard on a flat surface with keys facing down.
2. Remove the Back Cover (11 screws).
19608
Touchpad Cable
Connector
Membrane Cable
Connectors
Main
Board
Keylock
Cable Connector
MSR Board
Note: When you lift the Back Cover off, the MSR Swipe falls free.
Unplug the MSR Connector and remove the MSR as shown in the
Removing the MSR section.
3. Unlock the Membrane Cable Connector Locks (2) and remove the
two ribbon cables from their connectors.
19609
Membrane
Cable Connector Locks
To Next Page
Loading...