Chapter 2: Installation 2-3
Operational Environment
The following parameters apply to keyboard operations.
System Configuration
No keyboard configuration is required at installation time. The
keyboard is configured at the time of manufacture by default to
recognize the Ctrl-Alt-Del key combination for system reset.
Unit Setup
No unit setup is required at installation time, unless configuration
must be changed from factory defaults.
Diagnostics
Upon Powering Up or receiving a reset, the keyboard initializes by:
• Clearing RAM
• Resetting the indicator lights
Additionally, if a stuck key condition is detected, the USB HID
Keyboard usage ID of the stuck key is returned following the
successful status.
To Next Page
Loading...