NCR 7895 RS232 Configuration Setup Guide Rev. B Page 12 of 12
• NCR Prefix: 1002 * (prefix 02)
• NCR Suffix: 1003 * (terminator byte 03)
• NCR Label ID mode: NCR Mode *
4. Launch any Serial application with correct com port settings then perform
tests on the 7895 scanner (ex. barcode scanning, commands sending, etc.).
Note: If the serial application is not able to detect the 7895 scanner, reboot
the scanner to re-enumerate the device.
4 REFERENCES
5. NCR 7895 RS232 Configuration full setup guide: NCR Online
Information Product - RS-232 Interface Configuration
6. NCR 7895 Scanner/Scale Hardware User Documentation (BCC5-0000-
5511): NCR Online Information Product - 7895
-- End of Document --
To Previous Page
Loading...
