SYSTEM TECHNICAL MANUAL
HARDWARE DESCRIPTION
BLANK INTERFACE ADAPTER
This adapter provides the system integrator with the basic hard
ware to allow him to develop and install custom-built interfaces
or options for special requirements.
The adapter consists of a small printed circuit board (blank)
complete with an I/O bus connector, contained in a small housing
that permits direct connection to the I/O bus of the NCR DE
CISION MATE V. The dimensions of the blank board are given
in Figure 2.48. The developer must consider the standard bus I/O
arrangement and the power limitations as specified in the I/O bus
description of this manual.
Figure 2.48 Blank interface board dimension
2-67
To Next Page
Loading...