Kit 230 functions similarly to K231, but is connected inter
nally to the controller board. This kit should be installed by a
field engineer; it is not suitable for installation by the user.
Tilt Mechanism
This kit (K240) provides a means of tilting the NCR DECISION
MATE V by seven degrees. The user can easily install the device
by fixing a base plate to the bottom of the computer, using the
existing holes in the base of the cabinet.
NCR OMNINET Transporter
This kit (K600) can be installed, by the user, directly into the
I/O bus (slots 2 to 6). The adapter has twice the thickness of
other adapters, therefore it requires two slot positions for installa
tion. The adapter provides the interface between the NCR DE
CISION MATE V and the DECISION NET System.
MODEL AND KIT IDENTIFICATION
The configuration of the hardware is defined by the model num
ber. The standard arrangement of the model number is shown
below:
3 2 7 3 - x x
x x - x x x x
Language code
Power code
Sub model
Major model
NCR class number
The model number of the NCR DECISION MATE V is shown
in Figure 1.2. The optional features are shown in Figure 1.3. An
asterisk indicates a planned development not released at the time
of printing, but included for reference.
1-6
To Next Page
Loading...