1-10 Product Overview
Installation Notes
Footprint: The N3000 Site Controller requires a clearance of 2.0 in. (5.1 cm) above,
behind, and to the sides to properly install the unit. This accommodates the unit along
with its associated cable connectivity and provides for proper ventilation.
Moisture: The N3000 Site Controller should not be installed in areas where it might be
exposed to direct water spray. The unit is not meant for outdoor installation.
Power: The N3000 Site Controller has an external power supply of 90W rated for 110V
and 240V (auto-sensing) and with a frequency of 50Hz or 60Hz. The source power is
drawn from a regular AC wall outlet. The electronics are "universal" so that they
function when connected to standard wall outlets of most countries. For use in locales
other than North America, special wall outlet adapters or cables are required. For
international configurations, the country specific power cord may be ordered
separately.
To Next Page
