Pedestal (Dark White Color & Impact Mid Silver) 1-5
9. Install Mounting Screw (1) through the remaining mounting hole. Tighten all
Mounting Screws (4).
10. Cover the following mounting holes using the SS90 Hole Cover Label if there are no
side shelves, front shelf, or bagger to be installed to the pedestal.
a. Side mounting holes - cover holes if the side shelf kits, 7709-K432 (Narrow Shelf)
or 7709-K433 (Wide Shelf), will not be installed to the pedestal. There are two (2)
mounting holes on the left and right side of the pedestal.
To Next Page
Loading...
