6.47 Clock setting:
Press the “ ” button to enter the clock setting state. First, the hour bit flashes, indicating
that the hour value of the current time can be adjusted through the “ ”, “ ” buttons. Every
time you press the “ ” button add for one hour, every time you press the “ ” button reduce
for one hour. If you hold down the “ ” button or “ ” button for a long time, the hours will be
incremented or decremented automatically. After setting the hour value, press “ ” again. At
this time, the minute flashes, indicating that the minute value of the current time can be
adjusted through “ ”“ ”button. After setting the minute value, press “ ”again to finish.
6.48 Timing settings:
Long press " " button for 3 seconds to enter timing setting:
Enter timing selection, when timing on 1" clock "flashes, hours can be set with “ ”、
“ ”and then press “ ”button to switch to clock" minute ", minutes can be set with “ ”、
“ ” button.
Press the “ ”button again to switch to the setting of "timing off 1": the clock "time"
flashes, hours can be set with “ ”、“ ”and then press the “ ” button again to switch
to the clock "minute", minutes can be set with “ ”、“ ”button.
Other time periods are set and so on;
6.49 Press “ ”to exit or confirm.
Press in the main interface to display the current number of set timing periods;
6.5 Cancel timing setting:
When the set power-on time and power-off time are the same, cancel the timing setting
of the current time period.
6.51 Enforced Defrosting
press “ ” and “ ”at the same time for 5 seconds, then it enters into enforced
defrosting mode.
When entering into defrosting, “ ”appears.
To Next Page
Loading...