NDS DT002 User Manual

5. Fix the display on the wall bracket.
6. Connect the display DT002 to the SC320M or SC350M
Connect the other side of the communication cable (RJ
connector), to the SC320M or SC350M PCB, as showed in picture.
7
a. Insert the
display
mounting flaps
in the wall
mount press
and slide
upward
B. Down the
bottom part of
the display and
join the wall
mount
C. Slide downward
the display to
tighten the
bottom flaps
DT002
Display
connection
SC320M or SC350M solar regulator
internal PCB

NDS DT002 Specifications

General

Brand	NDS
Model	DT002
Category	Monitor
Language	English