10.F.A.Q.
• About solar panels, what’s the maximum voltage
supported by SUNCONTROL2?
Maximum supported voltage is 29,5V.
• Is it possible to connect one 200W solar panel
only, on a single SUNCONTROL2 connection?
It’s possible to connect just one bigger solar panel
(200W), for example on SUNCONTROL2 Pin N°5, but
you must connect Pin N°5 and Pin N°6.
Use, at least, a 6 mm
2
cross-size
cable.
• Is it normal to have a battery voltage (with solar
regulator working) over 15V?
It’s normal when the device is in desulphation mode.
It is possible to turn OFF the desulphation selecting
the proper charging curve: look at the chapter
“Charging curve selection”.
To Next Page
Loading...
Need help?
General
