4-14
Fine
Adjust the delay of internal clock to control the display focus. Indicator Value and Bar of minimum position
should be 0.0% Indicator Value and Bar of maximum position should be 100.0%
Factory setting: “0”
Fine (Phase) (Icon select) Fine (Phase) (adjust)
1. During Phase function operate, Phase Icon and slide bar color is changed from Normal condition.
2. “-” Value decrease
3. “+” Value increase
4. At exiting from this state, adjusted value is saved to EEPROM.
Fine(Phase) (Reset)
Recall Phase value to factory setting
To Next Page
Loading...
