NEC DT400 - Call Forwarding Options; Call Forwarding - All Calls; Call Forwarding - Busy;No Answer

Call Forwarding-All Calls
To Set
Press Speaker key or lift handset. Receive dial tone.
Press CF-AllCalls key. Receive special dial tone.
Dial destination station or 9 and the outside telephone
number.
Receive service set tone.
CF-AllCalls LED lights
Press Speaker key or hang up. Call Forwarding for all
calls is set.
To verify.
Leave phone on hook.
Press CF-AllCalls key.
Display indicates the station number calls are
forwarded to.
FORWARD XXXX
4:26 PM TUE 13 APR 2020
[ Voice ][ Headset ][ Release ]
To Cancel
Press Speaker key or lift handset. Press CF-AllCalls key.
FORWARD CANCEL
4:26 PM TUE 13 APR 2020
[ Voice ][ Headset ][ Release ]
LED on CF-AllCalls goes out.
Press Speaker key or hang up phone.
Call Forwarding-Busy/No Answer
To Set
Press Speaker key or lift handset. Receive dial tone.
Press CF-NoAnswer key.Receive special dial tone.
Dial destination station or 9 and the outside telephone
number.
Receive service set tone.
CF- CF-NoAnswer LED lights
Press Speaker key or hang up. Call Forwarding for all
calls is set.
To verify.
Leave phone on hook.
Press CF- CF-NoAnswer key.
Display indicates the station number calls are
forwarded to.
FORWARD XXXX
4:26 PM TUE 13 APR 2020
[ Voice ][ Headset ][ Release ]
To Cancel
Press Speaker key or lift handset. Press CF-NoAnswer
key.
FORWARD CANCEL
4:26 PM TUE 13 APR 2020
[ Voice ][ Headset ][ Release ]
LED on CF-NoAnswer goes out.
Press Speaker key or hang up phone.