Need help?Do you have a question about the NEC DT730 and is the answer not in the manual?
General| Type | IP Phone |
|---|---|
| Display | LCD |
| Display Size | 3.5 inches |
| Resolution | 320 x 240 pixels |
| Number of Lines | 6 |
| Programmable Keys | 24 |
| Power over Ethernet | Yes |
| Power | PoE or AC adapter |
| Headset Port | Yes |
| Speakerphone | Yes |
| Protocols | SIP |
| Ethernet Ports | 2 |
| Audio Codec Support | G.711, G.722, G.729 |
| Weight | 1 kg |
Details functions and labels of keys and components on DT Series phones.
Procedures for logging into the DT Series telephone terminal.
Steps for logging out of the DT Series telephone terminal.
Instructions for making a call to an external number using the DT Series phone.
Steps for making a call to an internal extension on the DT Series phone.
Procedure for placing an active call on hold and retrieving it.
Steps for transferring an active call to another extension or line.
Explains how to lock and unlock the DT Series telephone using the Security key.
How to make calls using speed dial keys and how to program them.
Instructions for setting up call forwarding for all incoming calls.
Procedures for forwarding calls when the line is busy to another destination.
How to set up call forwarding for calls that are not answered.
How to enable and disable the Do Not Disturb feature to block incoming calls.
Step-by-step instructions for adding new entries to the telephone directory.
To Next Page
