73
file name by using the digit keys.
STEP 21:After entering a file name, press (Enter)
or Exec soft key to start the downloading.
While downloading a file, the LCD displays
“Downloading...” first and then “Saving...”.
STEP 22:After the downloading is complete, the dis-
play changes as follows:
Reset the DT700 Series by pressing Exit
soft key.
Note:
TIP:
For details on character entry method, see HOW
TO INPUT CHARACTERS in chapter 4 Basic
Operation.
TIP:
A maximum of 20 characters ("0-9", "A-Z", "a-z",
"*", "#", ".", "-" or "_") can be entered as a file
name.
TIP:
To delete an entered character, press BK soft
key.
TIP:
Be sure not to turn OFF the DT700 Series while
"Saving..." is displayed on the LCD.
Exit
[Directory]
Download Complete!
Press Exit to Reset
TIP:
When the downloading ends in failure, "Down-
loading Failed!" is displayed on the LCD. Check
to see the following and then make a retry.
Check Points
Actions
Download file is not placed
in the specified directory.
Place the downlaod file in
the specified directory.
A different file name is
specified between DT700
Series and FTP/TFTP
server.
Set the same file name
from both DT700 Series
and FTP/TFTP server.
Incorrect IP address of
FTP/TFTP server has been
entered from the
telephone.
Set the proper IP address
of FTP/TFTP server.
The power to FTP/TFTP
server or network
equipments is OFF.
Turn on the power.
LAN cable is disconnected.
Reconnect the cable
securely.
To Next Page
Loading...
