NEC DT820 - Page 5

Issue : January 2017 DT820 DESI Less - Quick Reference Card (Release 4.0) 5
SPEED DIAL KEYS
To configure a Programmable Key as a Speed Dial
key
1. When the phone is in idle state, press the Feature
key.
2. If required, press the Program Soft Key to enter
the Programming Mode.
3. Press the desired Speed Dial key. The Speed Dial
key LED starts flashing.
For Speed dial keys that have already been
configured, the Speed Dial information is shown.
4. Enter a name for the Speed Dial key. Then press
Enter  on the cursor pad or the OK Soft Key.
Use the * key to switch between uppercase
keypad entry mode.
5. Enter a phone number for the entry and press
Enter  on the cursor pad or the OK Soft Key.
6. Enter  on the cursor pad or the OK Soft Key to
use this Speed Dial Key number, or use the
keypad to edit the number.
Note that only digits, * and # are accepted as
numerical input in a Speed Dial.
7. Select the monitor settings for the Speed Dial and
then press Enter  on the cursor pad or the OK
Soft Key.
8. Select Show in Directory if you want to also add
this entry to your Personal Directory, and press
Enter  on the cursor pad or the OK Soft Key.
9. Press the Save Soft Key to save the information.
10. Press the Exit Soft Key to exit the Speed Dial
Programming mode.
To originate a call from a Speed Dial Key
1. Press the desired Speed Dial Key, or
2. Lift the handset and press the desired Speed Dial
Key, or
3. Press the Speaker key and press the desired
Speed Dial Key.
FUNCTION KEYS
One or more speed dial keys can be pre-programmed
with a dedicated function or a (colleague’s) internal
telephone number of which the status can be
monitored by means of the LEDs.
Ask your system administrator for more details.
Function
Pressing this key activates the function:
- the corresponding LED is switched ON.
Pressing the key once more de-activates the function:
- the LED is switched OFF.
Telephone Number
When the LED is :
- OFF : the telephone is idle
- Flashing : the telephone is ringing
you can answer this call
- ON : the telephone is busy
USING THE HELP KEY
You can use the Help key to view information about
the Soft Keys that are displayed on your phone.
1. Press the Help key.
2. Press the Soft Key you want to see. Help
information for. You can use the UP / DOWN
cursor keys on the cursor pad to scroll through
the help information, if needed.
3. Press the Exit Soft Key to return to the previous
screen.
Help screens may not be available for all the Soft Keys
on your phone.
PRESENCE MONITORING
Presence Monitoring Icons and LED colors.
TYPE
STATUS
ICON
DESI-LESS LED
Line Key
Registered
LED is not lit
Unregistered
LED is not lit
Speed Dial
Key (no
monitoring)
Not Available
LED is not lit
BLF
Idle
LED is not lit
Ringing
Blinking RED
Subscription
failed
LED is not lit
On the phone
RED
ADJUSTING ANGLE OF TILT LEG
The angle of the tilt leg can be adjusted in two levels.
● to raise tilt leg : pull out the leg stoppers.
● to lower tilt leg : push in the leg stoppers.
Leg stoppers