NEC DXE Series - Fitting the Battery Pack and Charger

Registering a DECT Handset on the DXE96+
7
7. Press HOLD
If the handset was deleted Press HOLD to return to
successfully the display will the
DECT-PP REMOVE
show screen
If the port number entered Press HOLD to return to
is not installed the display the
DECT-PP REMOVE
will show screen
If the port number entered Press HOLD to return to
is not a DECT port the the
DECT-PP REMOVE
display will show screen
8. Press HOLD to return to the Enter Command> prompt
or enter a new port number to delete the registration of another DECT handset
9. Press DC to exit Administrator Mode or enter the Command Number again (Step
2. above) to delete further DECT handsets
3104:Port017
Not subscribed in it
3104:Port017
Removed.
3104:DECT-PP REMOVE
? Invalid Data