NEC DS1000 User Manual

Hardware Manual
03.2*.**
For additional resources, visit our Technical Support site on the web at http://ws1.necii.com/ds2000 .
5. Maintenance
Options and SMDR
1. Installation
Basics
3. Connecting Trunks
and Extensions
4. Optional
Equipment
• To use the IntraMail enhancements provided by software versions 03.2*.** and
higher, you must use the NEC IntraMail Utility version 1.2 to upgrade your Intra-
Mail CompactFlash card. If you don’t upgrade your card, the new features will not
be available.
• If upgrading from version 3 software prior to 03.10.08 using telephone program-
ming, you must reprogram the options in
1808-IntraMail Subscriber Mailbox
Options , 8005-IntraMail Master Mailbox Options , and 8006-IntraMail Rout-
ing Mailboxes after the upgrade.
• To avoid having to reprogram the above options, use the latest version of the
DS1000/2000 System Administrator to backup and restore the site database.
• Go to http://ws1.necii.com/ds2000 to download the latest versions of the Update
Utility, IntraMail Utility, System Administrator, and system software.
2. Trunk and
Extension Cabling
6. Specifications
and Parts

NEC DS1000 Specifications

General

Brand	NEC
Model	DS1000
Category	Telephone
Language	English

Summary

Installation Basics

System Preparation and Configuration

Covers unpacking, site readiness, and system setup procedures.

Installing the Cabinet

Details the process of mounting the main equipment cabinet.

Trunk and Extension Cabling

Trunk and AUX Mod Jacks

Information on connecting trunk and auxiliary lines using modular jacks.

The Extension Block

Details on wiring and connecting extension blocks for telephones.

Connecting Trunks and Extensions

Connecting Analog Trunks

Steps to connect analog CO trunks to the system.

Connecting Analog and Digital Extensions

Procedures for wiring and connecting telephones to the system.

Power Up the System

Instructions for powering on the installed system.

Optional Equipment

Installing External Paging

How to connect and configure external paging systems.

Analog Door Box

Installation and setup of analog door entry units.

Music Source

Connecting and configuring background music and music on hold.

DSS Console

Installing and programming Direct Station Selection consoles.

2-OPX Module

Connecting and installing the 2-OPX analog circuit module.

Maintenance Options and SMDR

The Update Utility and SMDR

Using software update utility and System Message Detail Recording.

Modem Installation

Connecting a modem for remote system maintenance.

System Reset

Procedure to reset the system for troubleshooting.

Database Transfer Utility

How to transfer system programming between DS1000 units.

Specifications and Parts

Specifications

Technical details and system capacities.

Parts List

List of system components and their part numbers.