DS1000
02.11.00
Release Notes
!! Important Notes When Upgrading or Transferring a Database !!
If upgrading or transferring a database from a software version prior to 02.02.14:
• Use the option
9803 - Initialize Distinctive Ringing
to initialize Distinctive Ringing sys-
tem-wide with a single command.
Following initialization, you must reset the system or
unplug and then replug each telephone.
• Use the option
9804 - Initialize Caller ID Log Utility
to initialize (clear) your Caller ID logs.
•
You should always use Call Forwarding Cancel to initialize Call Forwarding after upgrad-
ing your system from a prior software level.
When installing telephones:
• Digital station ports (300-315) automatically detect the type of connected device when the
keyset, 2-OPX Module or Digital Door Box is plugged in. With this software, it is no longer
necessary to individually set circuit types in
1801 - Extension Circuit Type
.
To Next Page
