EasyManuals Logo

NEC DS1000 Release Notes

NEC DS1000
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
DS1000 02.10.09 Release Notes
New Features in 02.10.09
DS1000 Release Notes 7 02.10.09
22-Button Non-Display Telephone Operation
It is strongly recommended that you use a display telephone when setting up Off Premise Call For-
warding. If you don’t have a display telephone, the following procedure explains how you can use a
22-button non-display set to enable Off Premise Call Forwarding.
To set up Call Forwarding Off Premise:
1. Program the number you want Call Forwarding Off Premise to dial into one of your Personal
Speed Dial bins (701-720).
You must do this before proceeding to step 2 below.
For example, the following sequence programs the number 12039265400 with the
name NEC to go out over trunk group 0:
#77 + 701 + HOLD + 90 + HOLD + 12039265400 + HOLD + 62 + 32 + 23 +
HOLD + SPK.
2. Press the ICM key and dial *33.
3. Dial 2 and enter the Personal Speed bin number you programmed in step 1 above + HOLD.
4. Select the Call Forwarding type:
- Dial 2 or press ALL to forward all calls.
- Dial 8 or press TRNK to forward just trunk calls.
Your DND key flashes.
To cancel Call Forwarding Off Premise:
Press the ICM key and dial *30.
Your DND key goes out.
Super Display Telephone Operation
To set up Call Forwarding Off Premise:
1. Press the ICM key and dial *3
OR
Press PROGRAM + CALL FWRD. You see:
2. Dial 3 or press OFF-PREMISE. You see:
- Press SPEED DIAL BIN to select a Speed Dial bin as your Off Premise Call Forwarding
number.

Table of Contents

Other manuals for NEC DS1000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC DS1000 and is the answer not in the manual?

NEC DS1000 Specifications

General IconGeneral
BrandNEC
ModelDS1000
CategoryTelephone
LanguageEnglish

Related product manuals