DS1000 02.10.12 Release Notes
Enhanced Features in 02.10.12
54 ◆ 02.10.12 DS1000 Release Notes
Super Display Telephone Operation
Interactive Soft Keys
PREVIOUS and PREV Soft Keys Renamed
To more closely match the key’s function, all occurrences of the PREVIOUS (Super Display) and
PREV (2-line display) soft keys have been renamed EXIT.
Off-Premise Extensions / On-Premise SLT Extensions
Exclusive Hold Available
A single line telephone connected to an analog station port or 2-OPX Module can place their Inter-
com or outside call on Exclusive Hold. (Note that this option does not apply to Voice Mail ports.)
To place your Intercom or outside call on Exclusive Hold
● Hookflash + Dial *7.
● Hang up.
- If the call is left on Exclusive Hold too long, it will recall to you.
- If you hang up without first dialing *7, the call will recall immediately.
- If you previously placed a call on Exclusive Hold or have a Camped-On call waiting, dialing
*7 will answer the waiting call. See Split Available below for more.
To retrieve a call you have placed on Exclusive Hold:
● Lift the handset and dial *7 (or hookflash).
Split Enhanced
A single line telephone connected to an analog station port or 2-OPX module can Split (alternate)
between their current call and waiting calls. The waiting calls can include a call you previously placed
on Exclusive Hold or camped-on calls. (Note that this option does not apply to Voice Mail ports.)
To Split (Alternate) between your current call and a waiting call:
●
Hookflash + Dial
*7
.
- You are connected to your camped-on call (if any) or the call that has been on Hold the longest.
- Repeat this procedure to cycle through all your waiting calls (from oldest to newest) and return
to your first call.
To Next Page
Loading...
Need help?
General
