English-59English-58
Operation
Access the following address to show HOME.
http://<the Monitor’s IP address>/index.html
Click each link on the left column below HOME.
NOTE: Function of buttons which are shown on setting pages.
[APPLY]: Save your settings.
[CANCEL]: Return to the previous settings.
NOTE: CANCEL is disabled after clicking APPLY.
[RELOAD]: Reload the settings.
[RESET]: Resets to the initial setting.
Network Settings
Click on “NETWORK” on the left column below HOME.
DHCP Select an option for setting the IP ADDRESS.
On: Automatically assign an IP address.
Off: Manually set an IP address for the monitor
connected to the network.
Manual DNS: Manually set an DNS Primary and
DNS Secondary address for the
monitor connected to the network.
The DNS server connected to the
monitor will automatically assign its
IP address.
IP ADDRESS Set your IP address for the monitor connected to the
network when [Off] is selected for [DHCP].
SUBNET MASK Set your subnet mask data for the monitor connected
to the network when [Off] is selected for [DHCP].
DEFAULT GATEWAY Set your default gateway for the monitor connected to
the network when [Off] is selected for [DHCP].
NOTE: Set as [0.0.0.0] to delete the setting.
To Next Page
Loading...