OR Press Feature Access key or One Touch key programmed for Direct
Station Selection.
➤ Voice announce after tone burst or wait for ringing call to be answered.
NOTE 1: When calling a multiline telephone, dialing 1 after the station number will change ringing to
voice or voice to ringing.
NOTE 2: To directly access a personal voice mailbox, dial 7
after dialing the station number.
O UTSIDE C ALLS
➤ Lift handset.
➤ Dial trunk access code i.e.
_
9.
OR Press idle Outside Line key.
➤ Dial telephone number.
➤ Converse.
T RUNK Q UEUING
After dialing trunk access code or pressing a busy Line key and receiving trunk
busy indication:
➤ Dial Trunk Queue set code 78
.
➤ Replace handset.
NOTE: When a line is available, your telephone will ring; lift handset and place call.
L AST CO/PBX NUMBER R EDIAL
➤ Lift handset.
➤ Press Redial.
➤ Dial Last Number Redial code *
.
➤ Converse.
S TATION/SYSTEM S PEED D IAL
➤ Lift handset.
➤ Press Redial and dial Speed Dial Memory location:
➤ Station Speed Dial 80~99
➤ System Speed Dial 00~79
OR Press Feature Access key or One Touch key programmed for
Station Speed Dial.
➤ Converse.
S CROLLING S PEED D IAL D IRECTORIES
➤ Press Speed Dial Softkey.
➤ SYS System Speed Dial.
➤ STA Station Speed Dial.
➤ Press UP/DOWN Softkeys to scroll through all entries.
4
To Next Page
Loading...
