NEC Express5800 Fault Tolerant Virtual Server Quick Start Guide 14
Figure 10: Select adapters for team.
If you add adapters to a team later, the system briefly loses network connectivity. To avoid this network
interruption, configure a larger team now.
5. Click Next and click Finish.
6. When the Intel
®
PROSet for Wired Connections dialog box reappears, click Apply. PROSet binds
the specified adapters into teams.
This operation takes at least one minute per team to complete. PROSet closes after processing is complete. Do
not abort the operation until it has completed, otherwise you must repeat the procedure.
After you have finished configuring fault tolerance for your FT Server, you will install Virtual Server R2 SP1.
To Next Page
Loading...
