Need help?Do you have a question about the NEC Express 5800 Series and is the answer not in the manual?
Configure arrays and controllers during initial provisioning or anytime after initial configuration.
Main tool for configuring arrays on RAID Controllers, available offline and online.
How to access and use the SSA GUI, including controller detection.
Procedure for performing configuration tasks on controllers, arrays, physical, and logical drives.
Steps to create a new array by selecting physical drives and configuring RAID settings.
Introduction to SSA CLI, its operating modes, and accessing it.
Explains the structure of SSA CLI commands, including target, command, and parameters.
Syntax and parameters for creating a logical drive using the SSA CLI.
Collects system storage info, detects problems, and provides a .zip configuration report.
To Next Page
General