What to do if hard disk drive test failed on NEC Server?
To resolve a hard disk drive test failure on your NEC Server, first enter the BIOS Setup and load default settings. If the issue persists, check the hard disk drive cable. If the problem continues, the hard disk drive or the main board might be the cause.
What to do if hard disk drive cannot format completely on NEC Server?
To resolve a hard disk drive that cannot format completely on your NEC Server, begin by entering the BIOS Setup and loading the default settings. If the issue continues, inspect the hard disk drive cable. If formatting still fails, the hard disk drive itself or the main board could be the source of the problem.
What to do if hard disk drive has write error on NEC Server?
To resolve a hard disk drive write error on your NEC Server, first enter the BIOS Setup and load default settings. If the issue persists, the hard disk drive itself may be the problem.
What to do if processor fan does not run on NEC Server?
If the processor fan on your NEC Server does not run but the power supply fan does, first ensure the system is not in power saving mode. If it's not, with the system powered on, measure the voltage of the processor fan connector; it should read +12Vdc. If the voltage is normal but the fan still doesn't work, replace the fan. If the issue persists, the main board may be the problem.
How to fix incorrect memory size shown on NEC Server?
To fix incorrect memory size shown or repeated during POST on your NEC Server, properly insert the memory modules in the DIMM sockets, and then reboot the system. If the problem continues, the memory module or the main board might be the issue.
To Next Page
General