79
System Event Log
Paramete
Description Option
SEL Components Change this to enable or disable all features of
System Event Logging during boot
Enabled
[Disabled]
Erasing SEL Choose options for erasing Smbios Event Log
Erasing is done prior to any logging activation
during reset.
[No]
Yes, On next reset
Yes, On every reset
When SEL is Full Choose options for reactions to a full Smbios
Event Log.
[Do Nothing]
Erase Immediately
Log EFI Status Codes Enable/Disable the logging of EFI Status Codes (if
not already converted to legacy).
Disabled
[Both]
Error code
Progress code
To Next Page
Loading...