EasyManua.ls Logo

NEC Express5800/T71f - NB Pcie Configuration

NEC Express5800/T71f
141 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
60
NB PCIe Configuration
Paramete
r
Description Option
PEG0 Display PEG0 configuration information.
PEG0 - Gen X Configure PEG0 B0:D1:F0 Gen1-Gen3 [Auto]
PEG1 Display PEG1 configuration information.
PEG1 - Gen X Configure PEG1 B0:D1:F1 Gen1-Gen3 [Auto]
PEG2 Display PEG2 configuration information.
PEG2 - Gen X Configure PEG2 B0:D1:F2 Gen1-Gen3 [Auto]
Run-time C7 Allowed Configure Run-time C7 feature. [Enabled]
Disabled
Enable PEG Enable/Disable PEG. Enabled
Disabled
[Auto]
Detect Non-Compliance Device Detect Non-Compliance PCI Express Device in PEG. Enabled
[Disabled]
Program PCIe ASPM after OpROM Enable/Disable Program PCIe ASPM after OpROM Enabled
[Disabled]
PEG0 De-emphasis Control PEG0:Configure the De-emphasis control on PEG. -6 dB
[-3.5 dB]
PEG1 De-emphasis Control PEG1:Configure the De-emphasis control on PEG. -6 dB
[-3.5 dB]
PEG2 De-emphasis Control PEG2:Configure the De-emphasis control on PEG. -6 dB
[-3.5 dB]
PEG0 - ASPM Control ASPM support for the PEG Device. This has
no effect if PEG is not the currently active device.
[Disabled]
Auto
ASPM L0s
ASPM L1
ASPM L0sL1
PEG1 - ASPM Control ASPM support for the PEG Device. This has [Disabled]

Table of Contents

Related product manuals