NEC Express5800/T71f - Page 73

61
no effect if PEG is not the currently active device. Auto
ASPM L0s
ASPM L1
ASPM L0sL1
PEG2 - ASPM Control ASPM support for the PEG Device. This has
no effect if PEG is not the currently active device.
[Disabled]
Auto
ASPM L0s
ASPM L1
ASPM L0sL1
PEG Sampler Calibrate Enable or disable PEG Sampler Calibrate\nAuto
means Disabled for SNB MB/DT, Enabled for IVB A0
B0.
Enabled
[Disabled]
Auto
Swing Control Perform PEG Swing Control, on IVB C0 and Later. Half
[Full]
PEG Gen3 Equalization Perform PEG Gen3 Equalization steps. [Enabled]
Disabled
Gen3 Eq Preset Search Perform PEG Gen3 Preset Search algorithm, on IVB
C0 and Later.
[Enabled]
Disabled
PEG RxCEM LoopBack Mode Enable/Disable PEG RxCEM LoopBack Mode. Enabled
[Disabled]