82
Boot Option Menu
The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error
message if the drive(s) specified is not bootable.
Paramete
Description Option
Setup Prompt Timeout Number of seconds to wait for setup
activation key. 65535(0xFFFF) means
indefinite waiting." Press the numeric keys to
input the desired value.
Bootup NumLock State Enable or Disable Bootup NumLock function. [On]
Off
Quiet Boot Enable/Disable showing the manufacturer's
logo during POST.
[Enabled]
Disabled
Boot Option #1/#2/#3/#4 Press Enter to configure the boot priority.
By default, the server searches for boot
devices in the following sequence:
1. UEFI device.
2. Hard drive.
3. Network device.
4. Removable device
Hard Disk Drive Priority Press Enter to configure the boot priority.
Network Device BBS
Priority
Press Enter to configure the boot priority.
CSM16 Parameters Press Enter to configure the CSM16
parameters.
CSM Parameters Press Enter to configure the CSM parameters.
To Next Page
Loading...