NEC Express5800 MC2400 - Chapter 3, BIOS Setup Configuration Tables; Documentation Errata; Boot Menu; Expressbuilder

4 Express5800 MC2400 System Release Notes
E
XPRESS
B
UILDER
The following advisory applies to all versions of E
XPRESS
B
UILDER
.
!
If you already have an operating system installed when creating a
maintenance partition, E
XPRESS
B
UILDER
will warn you of the existing
partition. If you want to preserve the installed operating system, do not
create the maintenance partition or the existing operating system will be
overlaid by the maintenance partition. Run the SSU and other utilities
from diskette.
Novell NetWare
The following advisory applies when using Novell NetWare 3.12.
!
CDROM.NLM does not support 32X CD-ROM drives. Because of this,
the 32X CD-ROM drive cannot be mounted and accessed from a remote
client.
!
Installation of two 3C905 LAN cards is not supported.
SCO
The following advisory applies when using SCO 5.04.
!
In a multiprocessor environment, the 3C905B LAN card driver IRQ
cannot be shared with another system IRQ.
Documentation Errata
Please note the following changes to the Express5800 LS2400 User’s Guide.
Chapter 3, BIOS Setup Configuration Tables
Replace the Boot Menu table with the following table.
Boot Menu
Feature Choices Description Your Setting
Extended RAM
Step
1MB
1KB
Every Location
No Memory Test
Tests Extended Memory
once per MB, or
once per KB, or
every location, or
no memory test.
Boot Device
Priority
Press
ENTER
.
Refer to “Boot Device Priority
Submenu.”
Hard Drive
Press
ENTER
.
Refer to “hard Drive
Submenu.”
Removable
Devices
Press
ENTER
.
Refer to “Removable Devices
Submenu.”