NEC G566 - External outgoing calls; Common trunk access code (Method 1)

Quick user manual for NEC iSIP DECT with G566 and i766
5
External outgoing calls
Description:
The system offers varying procedures for external outgoing calls from your DECT Handset. Please
use the most convenient method for you from the below list:
1. Dial the common trunk access code ( 9 ) for outgoing calls
2. Dial a specific code (805 + Line port number) for a specific line.
3. Dial a specific code (804 + Line group number) for a specific line group
4. Press a pre-programmed Line key (2, 3 or 4) on your DECT Handset.
5. Automatic trunk access by pressing the green button (only available if your port is
programmed for this in the system configuration).
Common trunk access code (Method 1)



Display shows
[Line Name]

Press the green
button
Dial “9”
(Common trunk
access code)
External Dial
tone (In case
you hear Busy
tone, there is no
free line)
Details about
seizure line are
shown
Dial the external
number
Display shows
[Line Name]
[Dialled digits]



Dialled digits are
shown
Wait for answer
Have the
conversation
Hang up by
pressing the red
button