58
NTP SETTINGS FOR THE ROOT ELEMENT
User Account/Security Setting -> Security Management -> Service Status Setting
Figure 45. NTP settings for the root element when the NTP server is at 192.168.180.36.
Most accurate time stamping of the events and logs etc. requires that an NTP server is available for the root
elements.
Figure 45 shows the settings for the root element. It is both a Client of the NTP server and a Server for the
normal elements. Unicast mode is used (i.e. using IP addresses to communicate).
NTP Version has to be the same as in the NTP server.
If there is no NTP server available in the management network, set the root element NTP Client Mode =
Disabled. In that case the root element clock (date and time) will slowly drift but the whole subnet (root
and its normal elements) remains locally synchronized.
To Next Page
Loading...
