73
It is possible to create several VLAN ports in the same physical port with certain limitations. As an example,
802.1q trunk-port (VID= 100) and access-port (VID=200) may coexist in an Ethernet port. The port will then
accept VID=100 tagged frames as well as VID=200 tagged frames. All untagged frames will also be accepted
and a tag with VID=200 is added to them. Modem ports can only use trunk VLANs.
SAMPLE VLAN SETTINGS
Provisioning -> ETH Function Setting -> VLAN Setting -> VLAN List ”+ Add VLAN ID”.
Create VID = 100, name ”Elisa”; VID = 300, name ”Sonera 3G”; VID = 400, name ”Sonera 4G”. See Figure 63.
Figure 63. VLAN List.
Now assign these VLAN IDs to Ethernet ports, type ”802.1q Tunnel”. Add all the VLAN IDs to the modem
port (Trunk).
Figure 64. VLAN settings in a sample case.
To Next Page
Loading...
