64
Figure 51. Management network using a dedicated IP DCN network
Figure 52. Cabling within a site with three separate IDUs
In Figure 52 the connection is between NE1 (has to be configured for NMS use) and NMS or between two
NMS ports. Note. If one of the IDUs is Pasolink NEO, its LLDP has to be enabled and the iPasolink IDU
connected to the NEO using the NMS port has to have “Connect NMS port to NMS” set to “Yes”.
In case of iPasolink 400 single IDU repeater (all three modems in a single IDU) the NMS connection is
internal and all modems are connected to Bridge1.
To Next Page
Loading...
