NEC M353WS - Page 116

105
5. Using On-Screen Menu
TurningOntheProjectorByApplyingComputerSignal[AUTOPOWERON(COMP.)]
WhentheprojectorisinStandbymode,applyingacomputersignalfromacomputerconnectedtotheCOMPUTER
INinputwillpowerontheprojectorandsimultaneouslyprojectthecomputer’simage.
ThisfunctionalityeliminatestheneedtoalwaysusethePOWERbuttonontheremotecontrolortheprojectorcabinet
topowerontheprojector.
Tousethisfunction,rstconnectacomputertotheprojectorandtheprojectortoanactiveACinput.
NOTE:
• Makesuretousethecomputercablesuppliedwiththisprojector.Ifacommerciallyavailablecomputercablethatdoesnothave
No.9pinfortheHotplugsignalisused,[AUTOPOWERON(COMP)]isnotfunctioned.
• Disconnectingacomputersignalfromthecomputerwillnotpowerofftheprojector.Werecommendusingthisfunctionincom-
binationoftheAUTOPOWEROFFfunction.
• Thisfunctionwillnotbeavailableunderthefollowingconditions:
- whenacomponentsignalisappliedtotheCOMPUTERINterminal
- whenaSynconGreenRGBsignalorcompositesyncsignalisapplied
- when[NORMAL]isselectedfor[STANDBYMODE].
• ToenabletheAUTOPOWERON(COMP.)afterturningofftheprojector,wait3secondsandinputacomputersignal.
 Ifacomputersignalisstillpresentwhentheprojectoristurnedoff,theAUTOPOWERON(COMP.)willnotworkandtheprojector
remainsinstandbymode.
Enabling Power Management [AUTO POWER OFF]
Whenthisoptionisselectedyoucanenabletheprojectortoautomaticallyturnoff(attheselectedtime:5min.,10min.,
15min.,20min.,30min.,60min.)inoneofthebelowconditions.
- Nosignalisreceived.
- Thethumbnailscreenisdisplayed.
- Nooperationisperformed.
NOTE:
• Thisitemcanbeselectedonlywhen[NORMAL]isselectedfor[STANDBYMODE].
• When[NETWORKSTANDBY]isselected,[AUTOPOWEROFF]willturngreyincolorandbedisabledand[0:15]willbeselected
automatically.
Selecting Default Source [DEFAULT SOURCE SELECT]
Youcansettheprojectortodefaulttoanyoneofitsinputseachtimetheprojectoristurnedon.
LAST ���������������������� Sets the projector to default to the previous or last active input each time the projector is turned on�
AUTO ��������������������� Searches for an active source in order of COMPUTER → HDMI1 → HDMI2 → VIDEO → USB-A → USB-B
→ COMPUTER and displays the first found source�
COMPUTER ����������� Displays the computer signal from the COMPUTER IN terminal every time the projector is turned on�
HDMI1 ������������������� Displays the digital source from the HDMI 1 IN terminal every time the projector is turned on�
HDMI2 ������������������� Displays the digital source from the HDMI 2 IN terminal every time the projector is turned on�
VIDEO �������������������� Displays the Video source from the VIDEO IN terminal every time the projector is turned on�
USB-A �������������������� Displays slides or plays back movie files from the USB memory device every time the projector is turned
on�
LAN ������������������������ Displays a signal from LAN port (RJ-45) or the USB Wireless LAN Unit�
USB-B �������������������� Displays the computer signal from the USB-B port every time the projector is turned on�