NEC M353WS - Projecting an Image (Basic Operation); Setup and Initial Power On

13
Thissectiondescribeshowtoturnontheprojectorandtoprojectapictureontothescreen.
❶ Flow of Projecting an Image
Step 1
• Connectingyourcomputer/Connectingthepowercord(→page14)
Step 2
• Turningontheprojector(→page15)
Step 3
• Selectingasource(→page17)
Step 4
• Adjustingthepicturesizeandposition(→page18)
• Correctingkeystonedistortion[KEYSTONE](→page22)
Step 5
• Adjustingapictureandsound
- Optimizing a computer signal automatically (→ page 26)
- Turning up or down volume (→ page 26)
Step 6
• Makingapresentation
Step 7
• Turningofftheprojector(→page27)
Step 8
• Afteruse(→page28)
2. Projecting an Image (Basic Operation)