NEC M353WS - Rear

6
1. Introduction
ACInput
Connect the supplied power cord’s
three-pin plug here, and plug the
other end into an active wall outlet.
(→ page 14)
Built-in Security Slot (
)*
Terminals (→ page 9)
Connection for cable cover (Left)
Screw holes
(→ page 147)
Connection for cable cover (Right)
Screw holes
(→ page 147)
Lamp Cover (→ page 133)
Rear Feet (→ page 19)
IntakeVent
(→ page 132)
Rear
[M403W/M363W/M323W/M403X/M363X/M323X/M283X/M403H/M323H]
MonauralSpeaker(20W)
* ThissecurityslotsupportstheMicroSaver
®
SecuritySystem.
Model name
Model name is indicated on the label sealed on
the bottom face of the projector.