NEC M403H - [3 D]

107
5. Using On-Screen Menu
[3D]
Selectinginputconnectedtoasourceof3Dimages[COMPUTER/HDMI1/HDMI2/VIDEO]
[3D]
Thisfunctionswitchesthe3DmodebetweenONandOFFforeachinput.
ON ������������������������� Turns on the 3D mode for the selected input�
NOTE:
Toconrmthatthesupported3Dsignalisaccepted,useeitherwayofthefollowing:
• Makesurethat[3D]isdisplayedinthetoprightofthescreenafterthesourceisselected.
• Display[INFO.]→[SOURCE]→[3DSIGNAL]andmakesurethat“SUPPORTED”isdisplayed.
OFF ������������������������ Turns off the 3D mode for the selected input�
[GLASSES]
Select3Dglassesmethod.
DLP
®
Link �������������� For 3D eyeglasses (ones manufactured by XPAND are recommended) or DLP
®
Link compatible LCD shutter
eyeglasses�
Others �������������������� For other LCD shutter eyeglasses such as IR or wired LCD shutter types�
[FORMAT]
Sets3Dformat.
NOTE:ThisoptionwillnotworkforVIDEOsource.
AUTO ����������������������������������Automatically selects the appropriate format� The supported format is HDMI 3D only�
SIDE BY SIDE ���������������������Selects this format for the SIDE BY SIDE 3D image� SIDE BY SIDE is a format that stores the left
and right eye images displayed horizontally� Only the half of the horizontal resolution is supported
TOP AND BOTTOM �������������Selects this format for the TOP AND BOTTOM 3D image� TOP AND BOTTOM is a format that stores the
left and right eye images displayed vertically� Only the half of the vertical resolution is supported�
FRAME PACKING ����������������Selects this format for the FRAME PACKING 3D image� FRAM PACKING is a format that stores the
left and right eye images without compression�
FRAME SEQUENTIAL ����������Selects this format for the FRAME SEQUENTIAL 3D image� FRAME SEQUENTIAL is a format that
displays the left and right eye images alternately� This format is available only for COMPUTER
input�
NOTE:
ThisfunctionwillnotworkforVIDEOsource.