NEC M403H - Turning on the Projector

15
2. Projecting an Image (Basic Operation)
Standby Blinking PowerOn
Steady red light Blinking blue
light
Steady blue
light
❸ Turning on the Projector
1. Slidethelenscovertotherighttouncoverthelens.
[M353WS/M303WS/M333XS]
1. Removethelenscap.
2. Press the (POWER) button on the projector cabinet
or the POWER ON button on the remote control.
The POWER indicator will turn to blue and the projector
will become ready to use.
TIP:
• Whenthemessage“Projectorislocked!Enteryourpassword.”
isdisplayed,itmeansthatthe[SECURITY]featureisturnedon.
(→page33)
After you turn on your projector, ensure that the computer
or video source is turned on and that the lens cover is
open.
NOTE:Whennoinputsignalispresent,theno-signalguidanceis
displayed(factorymenusetting).
(→page136)
Lens cap